The unit is in Top Working Order
Condition 1-10 o would say it's 8~to~8.50

The most striking tonal feature of the Ultimate Chorus amp is its fat, full-range chorus. Unlike many other chorus designs that can make an amp sound thin or “washsy”, our classic analog circuit actually adds depth and dimension to any style of playing— whether you’re playing rhythm or solo. Also, besides the basic Volume, Treble, Mid, Bass and Reverb controls in the Normal channel, the Ultimate Chorus features completely independent Reverb and Tone controls in the Drive channel.
The DRIVE channel also features exclusive Fender® Pre- & De-Emphasis Distortion circuitry based on unique Pre and Post clipper voicing filters. These filters were designed to simulate the preamp tone settings and speaker output of an overdriven tube amplifier. You get the searing smooth highs backed by deep punch that stack amps are known for. The MID BOOST switch provides a second pre-emphasis voice and the PRESENCE control provides continuous variation of the high frequency content in the de-emphasis voicing. The extended range, three band equalization circuitry is after the distortion and can be used to further modify the overall sound of the amp. In addition, a true, stereo chorus circuit utilizing two 65-watt power amplifiers gives this amp that lush, stereo chorus sound. The Fender® ULTIMATE
CHORUS is one of the most “Expressive” amplifiers ever made.

TYPE: PR 204
PART NUMBER: 100V Version 022-6771-010
120V Version 022-6701-010
230V Version 022-6761-010
240V Version 022-6731-010
INPUT IMPEDANCE: INPUT 1 only - Greater than 1M½
INPUT 2 - 131k½
NOMINAL LEVEL: INPUT 1 only - 100 mV
INPUT 2 - 200mV
POWER OUTPUT: 65W R.M.S. per channel = 130W R.M.S.
RATED LOAD IMPEDANCE: 8 Ohms per channel
MONO EFFECTS LOOP: Nominal Level: -10dBV
Send Output Impedance: 1k½
Return Input Impedance: 25k½
STEREO EFFECTS LOOP: Nominal Level: -10dBV
Send Output Impedance: 1k½
Return Input Impedance: 14k½
(Specifications for each channel - Left on Tip, Right on Ring)
POWER REQUIREMENTS: 100V AC 50/60 Hz, 360W
120V AC 60 Hz, 360W
230V AC 50 Hz, 360W
240V AC 50 Hz, 360W
SPEAKER COMPLEMENT: Two 8½ Fender® Special Design 12-inch speakers (P.N. 025923)
PHYSICAL
SPECIFICATIONS: Height: 18-1/2” (47cm)
Width: 26-1/8” (66cm)
Depth: 10-1/4” (26cm)
Weight: 47 lbs. (21.3kg)
SOUND: “KICKS @$$, in STEREO!”
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC